WHITE FOMECOR is an extremely light weight material comprised of extruded polystyrene with clay-coated white paper facers. It is available in 3/16"and 1/2" thickness, recommended for unframed photos.

BLACK FOMECOR is an extremely light weight material comprised of extruded polystyrene with clay-coated white paper facers. Itis available in 3/16"thickness, recommended for unframed photos as used for Trade Shows.

Prints are mounted on FOMECOR using Heat (up to 24x36). Avoid Mounting Inkjet Prints from Epson Printers as they may discolor due to the heat of mounting. Larger prints are mounted on Masonite with Cold Pressure Mounting.

CENTRE-MOUNTING a print on a larger size board carries a $5.00 surcharge per print.

We do mount prints produced elsewhere but we can’t accept responsibility for any problems that may arise during the mounting of prints produced elsewhere.

EDGING TAPES (for 1/2" FOMECOR) come in Black, White, Red, Grey, Blue and Brown.

PLASTIC MOULDING (for 1/2" FOMECOR) is available in Silver, Gold, Black and Grey.

Push/Pull METAL HANGERS for FOMECOR are $2.99 each.

For larger quantities from the same Image or special sizes, please contact us.

Mounted Prints larger than 20x30 requiring Shipping are subject to Special Crating Charges (on top of Shipping charges).

average service time: 1 - 2 working days